- New
ZOYI ZT-706S 3-in-1 Oscilloscope Multimeter
A professional handheld tester combining a 50MHz dual-channel oscilloscope with sampling up to 280MSa/s, a 66,000-count True RMS multimeter and a six-waveform signal generator. It features a 3.5-inch IPS colour display, waveform storage, screenshots, USB export and Type-C charging.
Ideal for electronics repair, automotive signal testing, power supplies, control systems, laboratories and field service. UK stock, fast dispatch and VAT invoice included.
Your data and payments are protected with SSL encryption and secure checkout.
Fast, reliable delivery — UK 2–4 days, express 1–2 days. International tracked delivery available.
30-day return & 12-month UK warranty on all ZOYI instruments.
Guarantee safe & secure checkout
The ZOYI ZT-706S is designed for technicians, engineers and repair specialists who need advanced diagnostic functions in a portable format. It reduces the need to carry separate instruments and allows users to switch between waveform analysis, electrical measurement and signal generation.
The two oscilloscope channels allow users to display and compare separate signals, inspect timing relationships and investigate intermittent circuit faults. Normal mode provides sampling up to 200MSa/s, while high-speed mode increases the rate to 280MSa/s for signals above 30MHz.
One-key AUTO setup helps stabilise unfamiliar waveforms quickly. Auto, Normal and Single trigger modes are available with rising-edge and falling-edge triggering.
The integrated digital multimeter provides detailed measurements for electronics repair, equipment maintenance and compatible electrical testing. Both automatic and manual range selection are supported.
Generate standard test signals without carrying a separate function generator. Frequency, amplitude and duty cycle can be adjusted directly from the instrument for compatible circuit-development and troubleshooting tasks.
| Waveform | Maximum Frequency |
|---|---|
| Sine Wave | Up to 10MHz |
| Square Wave | Up to 2MHz |
| Triangle Wave | Up to 2MHz |
| Sawtooth Wave | Up to 200kHz |
| Half-Wave and Full-Wave | Up to 200kHz |
The 3.5-inch IPS full-view colour screen provides clear waveform and measurement display. Waveforms and screenshots can be stored on the instrument and exported through the USB Type-C connection.
The rechargeable design, USB-C charging and compact 177 × 89 × 40mm housing make the ZT-706S suitable for workshop benches, field service and locations where a full-size oscilloscope is impractical.
| Specification | Details |
|---|---|
| Instrument Type | Oscilloscope, True RMS multimeter and signal generator |
| Oscilloscope Channels | 2 channels |
| Bandwidth | 50MHz |
| Sampling Rate | 200MSa/s normal mode; 280MSa/s high-speed mode |
| Time Base | 10ns/div to 20s/div |
| Input Impedance | 1MΩ parallel with 16pF |
| Multimeter Display | 66,000 counts, True RMS |
| DC Voltage | Up to 1000V |
| AC Voltage | Up to 750V |
| AC/DC Current | Up to 10A |
| Resistance | Up to 66MΩ |
| Capacitance | Up to 99.99mF |
| Multimeter Frequency | Up to 99.99kHz |
| Display | 3.5-inch IPS colour screen |
| Charging | USB Type-C |
| Dimensions | 177 × 89 × 40mm |
| Weight | Approximately 390g with battery |
Yes. It has two oscilloscope inputs, allowing two waveforms to be displayed and compared.
Yes. It generates sine, square, triangle, sawtooth, half-wave and full-wave signals. Frequency, amplitude and duty cycle can be adjusted.
Yes. Waveform screenshots can be stored on the instrument and exported to a computer through the USB Type-C connection.
It can inspect compatible low-voltage automotive sensor, actuator and control signals. Always use the correct probe, attenuation and safe test method for the circuit being measured.
Data sheet
Specific References