Choosing the right handheld oscilloscope multimeter can be confusing, especially when different models offer different bandwidth, sampling rate, channel count, multimeter accuracy and signal generator features. In this guide, we compare five popular ZOYI oscilloscope models: ZT-700, ZT-701S, ZT-702S, ZT-703S and ZT-706S.

These portable ZOYI instruments are designed for electronics repair, automotive diagnostics, electrical maintenance, PCB troubleshooting, field testing, education, hobby electronics and workshop use. Some models are simple 2-in-1 oscilloscope multimeters, while others add a built-in signal generator for complete 3-in-1 testing.

Which ZOYI Oscilloscope Is Right for You?

The best ZOYI oscilloscope depends on how you plan to use it. If you need a simple handheld oscilloscope for learning and basic waveform checks, the ZT-701S or ZT-702S is a good starting point. If you need a more advanced oscilloscope multimeter with signal generator, the ZT-703S or ZT-706S gives you more diagnostic power.

For electronics repair, automotive sensor testing, PWM signal checks, power supply diagnostics and field service work, a portable oscilloscope multimeter can save time because it combines waveform viewing and standard multimeter measurements in one compact tool.

Why Choose a Handheld Oscilloscope Multimeter?

A standard digital multimeter can measure voltage, current, resistance and continuity, but it cannot show the shape of a signal. An oscilloscope shows the waveform, allowing you to see pulses, ripple, noise, timing faults, sensor signals, PWM control signals and startup behaviour.

A handheld oscilloscope multimeter combines both tools in one unit. This makes it useful for mobile engineers, automotive technicians, electronics repair shops, students and anyone who needs waveform analysis without carrying a large bench oscilloscope.

• See signal shape instead of only reading voltage values
• Check PWM, square waves, sine waves and sensor outputs
• Find intermittent faults that a normal multimeter may miss
• Save space with one portable tool for waveform and DMM testing
• Work on-site without needing a full bench test setup

ZOYI Oscilloscope Model Comparison Table

ZT-700 – Best for Oscilloscope + Signal Generator Use

The ZOYI ZT-700 is a compact handheld oscilloscope and signal generator designed for users who need waveform viewing and signal output in one portable device. It is especially useful for education, embedded development, waveform simulation, basic circuit testing and signal injection.

• Best for: testing and generating basic waveforms
• Good choice if: you want a compact signal source with oscilloscope display
• Less suitable if: you need full multimeter functions or dual-channel comparison

ZT-701S – Best Entry-Level Oscilloscope Multimeter

The ZOYI ZT-701S is a compact entry-level oscilloscope multimeter for users who want to start viewing waveforms without buying a large bench oscilloscope. It is ideal for students, hobby electronics, simple sensor checks, basic fault finding and educational use.

• Best for: basic waveform viewing and True-RMS multimeter use
• Good choice if: you need a small, affordable scope-meter for learning
• Less suitable if: you need dual-channel 50MHz analysis or signal generation

ZT-702S – Best Budget 10MHz Oscilloscope Multimeter

The ZOYI ZT-702S is one of the most popular ZOYI oscilloscope multimeters because it gives users a practical mix of oscilloscope and multimeter functions at an affordable price. With a 10MHz class oscilloscope and 9999-count True-RMS multimeter, it is suitable for many workshop and field-testing jobs.

• Best for: electronics repair, basic automotive signals, power supply checks and mobile diagnostics
• Good choice if: you want a compact 2-in-1 meter and scope
• Less suitable if: you need two oscilloscope channels or a stronger built-in signal generator

ZT-703S – Best All-Round 3-in-1 Oscilloscope Multimeter

The ZOYI ZT-703S is a strong all-round choice for users who want a dual-channel oscilloscope, True-RMS digital multimeter and signal generator in one handheld device. It is suitable for comparing two signals, checking sensor timing, testing PWM outputs, diagnosing electronics boards and injecting test waveforms.

• Best for: electronics repair, automotive diagnostics, dual-channel waveform analysis and field service
• Good choice if: you want one portable tool for oscilloscope, DMM and signal generator work
• Less suitable if: you only need basic voltage readings and never use waveform analysis

ZT-706S – Best Upgraded Model for Higher DMM Resolution

The ZOYI ZT-706S is the upgraded option for users who want a more advanced handheld oscilloscope multimeter with very high multimeter resolution. With 66,000-count True-RMS measurement, dual-channel oscilloscope capability and signal generator functionality, it is designed for users who need more precision and a more professional feature set.

• Best for: professional diagnostics, detailed multimeter work, electronics repair and advanced field testing
• Good choice if: you want the highest-spec ZOYI scope-meter in this comparison
• Less suitable if: you only need a low-cost beginner oscilloscope

How Much Oscilloscope Bandwidth Do You Need?

Bandwidth is one of the most important oscilloscope specifications. It tells you the highest signal frequency the oscilloscope can display with useful accuracy. For slow sensors, audio signals, battery circuits and basic electronics, a 5MHz or 10MHz oscilloscope may be enough. For faster digital signals, PWM, switching power supplies and more detailed diagnostics, a 50MHz model gives more headroom.

Single Channel vs Dual Channel Oscilloscope

A single-channel oscilloscope is suitable when you only need to view one signal at a time, such as checking a PWM output, sensor signal, ripple voltage or simple waveform. A dual-channel oscilloscope lets you compare two signals at once, such as input vs output, trigger vs response, crankshaft vs camshaft sensor, or two logic/PWM signals.

• Choose single channel for basic waveform checks and budget diagnostics.
• Choose dual channel for automotive diagnostics, electronics repair and signal timing comparison.
• Choose signal generator models if you also want to inject test waveforms into a circuit.

Common Oscilloscope Questions

Can an oscilloscope multimeter replace a normal multimeter?

For many everyday jobs, yes. Models such as the ZT-702S, ZT-703S and ZT-706S include True-RMS multimeter functions as well as oscilloscope mode. However, for high-energy electrical work, always follow the rating, manual and safe measurement limits.

Is a 10MHz oscilloscope enough?

A 10MHz oscilloscope is suitable for many basic electronics, sensors, audio signals, slow PWM and general repair tasks. For faster digital signals, switching power supplies and cleaner waveform analysis, a 50MHz model such as the ZT-703S or ZT-706S gives more headroom.

What is sample rate and why does it matter?

Sample rate tells you how many times per second the oscilloscope samples the signal. A higher sample rate helps the oscilloscope draw the waveform more accurately, especially on fast edges, pulses and digital signals.

Do I need a signal generator?

A signal generator is useful when you want to inject a known waveform into a circuit, test filters, simulate sensor signals, check amplifiers or demonstrate electronics concepts. If you need this function, consider the ZT-700, ZT-703S or ZT-706S.

Which ZOYI oscilloscope is best for automotive diagnostics?

For simple sensor checks, the ZT-702S can be enough. For comparing two automotive signals, such as camshaft and crankshaft sensors or input/output control signals, the ZT-703S or ZT-706S is the better choice because of dual-channel operation.

Which ZOYI oscilloscope is best for electronics repair?

The ZT-703S is the best all-round option for electronics repair because it combines dual-channel oscilloscope, True-RMS multimeter and signal generator functions. The ZT-706S is the upgraded choice if you also want higher-resolution DMM measurements.

Best ZOYI Oscilloscope by User Type

Final Verdict – Which ZOYI Oscilloscope Should You Buy?

If you want the lowest-cost entry point for basic waveform checks, choose the ZT-701S. If you want a better budget all-rounder, the ZT-702S is a practical 10MHz oscilloscope multimeter. If you need dual-channel waveform comparison and a signal generator, the ZT-703S is the best all-round model. If you want the highest multimeter resolution in the range, choose the ZT-706S. If your main need is waveform output and signal simulation, the ZT-700 is the best fit.

Shop ZOYI Oscilloscope Multimeters in the UK

Related ZOYI Guides